Boom Lift License Vernon

Boom Lift License Vernon - In order to operate an aerial boom lift, operators should be licensed through training which could be attained utilizing both classroom sessions and practical training and by obtaining a boom lift license. Instruction should be given with respect to the type of aerial lift that will be used on the job. A License is needed for anyone who works on or operates an aerial boom lift.

Vehicle-mounted aerial devices consist of the following work vehicles: extensible boom platforms, aerial ladders, vertical towers, articulating boom platforms, and whichever combination of these types.

When using a boom lift, there are several basic safety rules which apply to all boom lifts. Safety of the worker is a main concern whilst they are working inside the basket. The worker must always put on a body harness and lanyard, connecting it to the basket or boom. Never tie off to an adjacent pole, structure, or equipment. Workers must stand on the basket floor, and never climb or sit on the edge of the basket. The load limitations of the manufacturer should be followed.

Lift operators have to be authorized to operate an aerial lift. The manufacturer's guidebook should be kept within the lift and the operator has to be familiar with all aspects of that specific unit. Operators are responsible for ensuring that safety procedures are followed in operating the lift. A daily test of lift controls should be performed. Position outriggers and set brakes (if they are utilized) on a stable surface or on pads. If working on a slope, utilize wheel chocks.

Never move an aerial lift truck with an elevated boom while workers are inside the basket. Articulating boom and extensible boom platforms used as personnel carriers must have accessible, plainly marked, upper controls. Except for in emergency cases, lower controls must not be utilized to override upper controls unless permission has been given by the person in the lift.

Do not wear tree or pole climbers shall while working from an aerial lift.
Do not alter the insulated portion of the aerial lift.
Make sure that the booms are thoroughly checked, that the machine is correctly cradled and the outriggers are in the stowed position prior to moving.
Make certain that lifts being used in or near power lines are di-electrically tested and conform to local regulations.

Click to Download the pdf